Line Unit Isolator Module FL-433/ISO
(AGNI)
AESTHETICALLY PLEASING DESIGN
LBCP APPROVED AS PER EN-54 STANDARDS
MONITORS UPTO 70 DEVICES BETWEEN ISOLATORS
LED STATUS INDICATOR
MICRO-CONTROLLER BASED FOR BETTER RELIABILITY & PERFORMANCE
IN THE EVENT OF SHORT CIRCUIT ISOLATES FAULTY PARTS OF THE LOOP
AUTOMATICALLY RESETTING ONCE THE FAULT HAS BEEN CLEARED
FLUSH / SURFACE MOUNTING
Technical Specifications
Certification
Listed: LPCB
Certified: EN54-17:2005
Module Specifications
Input Voltage: 24VDC (16V to 28V)
Current Consumption: Standby 0.15mA, Alarm: 1.8mA
Protocol/Addressing: Agni / Addressing not required
Isolator:
Maximum Open Voltage: 11V
Minimum Open Voltage: 8V
Maximum Close Voltage: 3V
Minimum Close Voltage: 1.4V
Maximum Continuous Current: 500mA
Maximum Transient Output Current: 5A
Maximum Leakage Current: 2mA
Max closed Impedance: 0.65 ohms
Number of monitored Output Impedance: Max 70 Devices; 480 ohms
Physical Specifications
Material / Color: ABS / White Glossy finishing
Ingress Protection Rating: IP30
Dimension: 108 mm x 86 mm x 38 mm
Weight: 170g (with Base), 92g (without Base)
Environmental Specifications
Operating Temperature: -10°C to +50°C
Humidity: 0 to 95% Relative Humidity, Non condensing
EN54-17:2005 Certified
LPCB Approved
In the event of a short circuit isolates faulty parts of the loop
Automatically resetting once the fault has been cleared
Can monitor up to 70 devices
LED status indicator
Loop powered device
Aesthetically pleasing design
Surface mounting with fix base for simple installation
