Ajax Hub — smart control panel for security alarms

The control panel of the security alarm system is used to receive and then process signals from sensors for various purposes. The control panel is the primary device in the security system, which determines the functionality of the installed alarm. To choose a central, you need to decide on their main types and possible functionality.

The principle of operation of burglar alarm control panels

In the calm mode, the intrusion alarm control panel monitors the state of the security system sensors and connection lines. When an alarm occurs or a change in the parameters of the devices occurs, the control panels of the control panels send messages to the keypad indication panel or sounders. If the installed security system is connected to the central console of the security company, messages are sent there as well.

Types of control panels

The main difference between alarm control panels is the way they receive power.

Wired alarm control panels and wireless control panels

Wired devices require wiring. It is essential to lay down a device of this type for installation at the design stage of the room to maintain the integrity of the repair. The second type of control panel for signalling is wirelessly connected to the network via a radio channel. Wireless control panels are installed even in finished interiors while maintaining their appearance. Wireless communication of such control panels with alarm sensors is carried out using radio channels.

Signalling pannels according to the method of obtaining information

Some models of alarm control panels equipped with a GSM module report alarms via phone calls or SMS, depending on the settings. Some security systems activate an alarm signal using sirens.

Smart control panel for security alarm Ajax Hub

The Ajax Hub smart alarm control panel controls the accurate monitoring of all connected Ajax devices using the Jeweler radio protocol. It immediately sends an alarm signal to all users of the system and the security console.Jeweller radio technology allows you to monitor the operation of security system sensors at a distance of up to 2000 m, provided there are no obstacles. Jeweller translates the entire system to clean frequencies when jamming the radio signal. The performance of the sensors is checked by pings at least every 12 seconds.Ajax Hub collects information about the operation of connected sensors in encrypted form, after which it analyzes the received data and, in the event of an alarm, immediately informs system users about the danger and directly to the security console. To send alarms, Ajax Hub uses two communication channels: GSM or Ethernet for SMS messages, push notifications or phone calls, respectively.The device package includes:

The Ajax Hub itself.

A power cable.

An Ethernet cable to connect the hub to the Internet.

A mounting kit.

Ajax Hub installation and mountingThe Ajax Hub control panel is installed on the SmartBracket mount, and the configuration is done using a mobile application through which sensors are connected. Before adjustment, the sensors, the response zone and the noise level are remotely tested.