Specification
Physical & Power
Front panel: Aluminum alloy
Camera: 2M pixels, automatic lighting
Numeric keypad with extra buttons
Light sensor: Support
Infrared sensor: Support
Wiegand port: Support
RS485 port: Support
RF card reader: 13. 56MHz & 125kHz
Relays out: 2
Inputs: 2
Microphone: 1
Speaker: 1
Ethernet port: RJ45, 10/100Mbps adaptive
802.3af Power- over - Ethernet
12V DC connector (if not using PoE)
Water-proof & Dust- proof: IP65
Installation: Flush-mounted or Wall- mounted
Flush-mounted DIM: 226x108x52mm
Wall- mounted DIM: 185x85x29mm
Working Humidity: 10 ~ 90%
Working Temperature: -30°C ~ +65°C
Storage Temperature: - 40°C~ + 70°C
Audio
SIP v1 (RFC2543), SIP v2 (RFC3261)
Narrowband audio codec: G.711a, G.711μ
Wideband audio codec: G.722
DTMF: In- band, out-of-band DTMF (RFC2833), SIP Info
Echo Cancellation
Voice Activation Detection
Comfort Noise Generator
Video
Sensor: 1/3”, CMOS
Pixels: CIF, QCIF, VGA, 4CIF, 720p
Video codec: H.264
Video resolution: up to 1080
Max. image transfer rate: 720p -30fps
Viewing angle: 110°(H) / 58°(V)
High intensity IR LEDs for picture lighting during dark hours with internal light sensor
Compatible to 3rd- Party video components, e.g. NVRs
Documentation |
Download |
resources_Akuvox_R20K_Datasheet_V2.0.pdf |
Download |
-
Door Entry Feature
- Relays controlled individually by DTMF tones
- Camera permanently operational
- Auto- night mode with LED illumination
- White balance: auto
- Minimum illumination: 0.1LUX
-
Networking & Protocol
- Protocols support: IPv4, HTTP,HTTPS, FTP, SNMP, DNS, NTP, RTSP, RTP, TCP, UDP, ICMP, DHCP. ARP
-
Deployment & Maintenance
- Auto- Provisioning
- Web management portal
- Web-based packet dump
- Configuration backup / restore
- Entry log export
- Access table export / import
- Firmware upgrade
- System logs (include door access logs)
-
Application Scenario
- Office doorphone with on-site or hosted |P-PBX
- Remote site entry over Internet
- Apartment/flat intercom with door access control